Part 1, Section 3: Revisions Table
This document will continue to be periodically reviewed by Measurement Canada to ensure its effectiveness with respect to its objectives.
Revision table Date of revision or addition | Language | Section | Nature of the revision or addition |
October 2016 | English/French | Part 2, section 1 | - Renamed the title:
"Part 2, section 1a: Type 2-11, 3-11, 7-11: Automatic Catch Weighing Device—Dynamic Weighing" - In Part 2, added section 1b, titled "Type 3-12: Automatic Catch Weighing Device—Static Weighing''
- Updated the document to specify that the procedure in section 1a is to be used for testing of ACWDs that perform dynamic weighing
- Specified the device types which can be tested using section 1a procedure
- Editorial corrections to ensure consistency of terminology used
|
October 2016 | English/French | Part 3, section D | - Editorial changes and extensive modifications to the Product Test Load Development procedure for individual commodities.
|
September 2013 | English/French | Part 2, ASTP – 3 DTWS | - Simplified procedure and grouped relevant sections.
- Provided references for procedures addressed elsewhere (e.g. break point).
|
May 2013 | English/French | Part 3, Appendix C | - Removed all references to bulletin M-02, which has been revoked.
|
March 2013 | English/French | Part 2, ASTP – 8 | - Removed Product Test Load Development procedure as they will be included elsewhere.
- Removed Test Chain procedure as they are now considered obsolete.
- Added notification regarding LOE from sections 174 and 175.
- Reduced Minimum Totalized Load to 800e for R193 devices to harmonize with OIML.
- Added weighbelt and roller information.
- Expanded sealing requirements to include speed sensors.
- Miscellaneous clarifications and corrections.
|
March 2013 | English/French | Product Test Load Development | |
October 2011 | English/French | Part 2, ASTP – 3 DTWS | - Simplified test procedure.
|